DSI Wood Finishing Spray Systems



DSI distributes C.A. Technologies wood finishing stain and spray systems to customers in DSI Pittsburgh, PA, DSI Cleveland, OH, DSI Millersburg, OH, DSI Columbus, OH, DSI Cincinnati, OH, DSI Detroit, MI, DSI Louisville, KY and DSI Indianapolis, IN.

Wood Finishing Spray Systems < DSI Accessories WaterBorne Finishing Adhesive Systems

C.A. TechnologiesDSI offers a full line of spray finishing equipment from C.A. Technologies like spray guns, precision atomizing nozzles and aircaps.

C.A. Technologies produces the top selling LYNX pressure feed and JAGUAR gravity feed spray guns, available in both HVLP and Conventional. These guns can be fitted with the 100, 200, or 300 series nozzles and fine finish aircaps and all have stainless steel wetted parts. The Cougar, Tomcat, Panther, AutoCAT, and Techline guns provide customers with more options to meet a wider range of finishing needs.

DSI also wholesales replacement nozzles and aircaps of Binks, DeVilbiss, and Sata guns.

Contact a DSI sales representative at 800-745-1778 for pricing on Wood Finishing Spray Equipment Systems in Pittsburgh, PA, Columbus, OH, Cleveland, OH, Cincinnati, OH, Millersburg, OH, Detroit, MI, Indianapolis, IN and Louisville, KY.


Wood Finishing Equipment & Systems

Bobcat Air Assist Airless

Bobcat Air Assist Airless

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 1/4" NPS (m)
Weight - 17 oz.
Requires 6 CFM

Part Sheet: Bobcat Spray Gun
Cougar Air Assist Airless

Cougar Air Assist Airless

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 1/4" NPS (m)
Weight - 23 oz.
Requires 6 CFM

Part Sheet: Cougar Spray Gun

Air Assist Airless 14:1 Finish Pump

Air Assist Airless 14:1 Finish Pump

Specifications:
Pump Ratio - 14:1
Max Air Pressure - 107 PSI
Max Fluid Pressure - 1500 PSI
Fluid Volume - 1/3 GPM per cycle

Part Sheet: Cougar Peak 14:1 Outfit
Part Sheet: Bobcat Peak 14:1 Outfit
Part Sheet: Cougar 14:1 Outfit
Part Sheet: Bobcat 14:1 Outfit

Portable Air Assist Airless 14:1 Pump<

Portable Air Assist Airless 14:1 Pump

Specifications:
2 HP Compressor (100 P.S.I. MAX)
Cougar/Bobcat AAA Gun
No Stall Air Motor Design
4 Gallon Air Tank (Twin 2 Gallon)
14:1 Ratio Stainless Steel Pump


CAT-X-C Classic (Fine Finish)

CAT-X-C Classic (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (f)
Weight - 20 oz.
24-1411 - 13.5 CFM @ 29 PSI
24-1352 - 11.0 CFM @ 35 PSI
Only available CAT Pack or E-Pack

Part Sheet: CAT-X
CAT-X-B Black Teflon (Fine Finish)

CAT-X-B Black Teflon (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (f)
Weight - 20 oz.
24-1411 - 13.5 CFM @ 29 PSI
24-1352 - 11.0 CFM @ 35 PSI
Only available Pack or E-Pack

Part Sheet: CAT-X

CAT-X-F Flag (Fine Finish)

CAT-X-F Flag (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (f)
Weight - 20 oz.
24-1411 - 13.5 CFM @ 29 PSI
24-1352 - 11.0 CFM @ 35 PSI
Only available Pack or E-Pack

Part Sheet: CAT-X

CAT-X-M Marble (Fine Finish)

CAT-X-M Marble (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (f)
Weight - 20 oz.
24-1411 - 13.5 CFM @ 29 PSI
24-1352 - 11.0 CFM @ 35 PSI
Only available Pack or E-Pack

Part Sheet: CAT-X

CAT-X-S Skulls (Fine Finish)

CAT-X-S Skulls (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (f)
Weight - 20 oz.
24-1411 - 13.5 CFM @ 29 PSI
24-1352 - 11.0 CFM @ 35 PSI
Only available CAT Pack or E-Pack

Part Sheet: CAT-X
CPR-G - CAT Pressure Reduced (Fine Finish)

CPR-G - CAT Pressure Reduced (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (m)
Weight - 20 oz.
23-1301 - 13.5 CFM @ 29 PSI
23-2101 - 11.0 CFM @ 29 PSI
Only available CAT Pack or E-Pack

Part Sheet: CPR-G

CPR - CAT Pressure Reduced (Fine Finish)

CPR - CAT Pressure Reduced (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 3/8 NPS (m)
Weight - 20 oz.
23-1301 Requires 13.5 CFM @ 29 PSI
23-2101 Requires 11.0 CFM @ 29 PSI
Only available in a CAT Pack

Part Sheet: CPR

CAT-X-M Marble (Fine Finish)

CAT-X-M Marble (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (m)
Weight - 20 oz.
23-1301 - 13.5 CFM @ 29 PSI
23-2101 - 11.0 CFM @ 29 PSI

Part Sheet: CRP-T3

Jaguar 100H HVLP (Gravity, General Purpose / Low CFM)

Jaguar 100H HVLP (Gravity, General Purpose / Low CFM)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (m) Weight - 20 oz. CFM is dependent on Air Cap (21-1090 Low CFM air cap requires 6 CFM @ 15 PSI) Available in a CAT Pack or E-Pack

Part Sheet: Jaguar 100H (J100H)
CPR-G - CAT Pressure Reduced (Fine Finish)

CPR-G - CAT Pressure Reduced (Fine Finish)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 3/8 NPS (m)
Weight - 15 oz.
CFM dependent on Air Cap
(21-1090 Low CFM air cap requires 6 CFM @ 15 PSI)
Available in a CAT Pack

Part Sheet: FE-Line Low CFM (FE-LCFM)

Techline T3 HVLP (Gravity)

Techline T3 HVLP (Gravity)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.5mm (m)
Weight - 20 oz.
Requires 13.5 CFM @ 45 PSI


Part Sheet: Techline T3 (T3)

TJR. HVLP (Gravity) | TJR. DELUXE | TJR. GLAZE

TJR. HVLP (Gravity)
TJR. DELUXE | TJR. GLAZE

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 16mm x 1.0mm (m)
Weight - 15 oz.
Requires 4 CFM

Part Sheet: Techline JR (TJR)

Tomcat 100C (General Purpose)

Tomcat 100C (General Purpose)

Specifications:
Air Inlet - 1/4” NPS (m)
Fluid Inlet - 3/8 NPS (m)
Weight - 19 oz.
CFM is dependent on Air Cap

Part Sheet: Tomcat 100C (T100C)
51-132 (Techline 2 Quart - Double Regulated)

51-132 (Techline 2 Quart - Double Regulated)

The Techline 2 quart is simple in design and versatile in operation. The 51-132 comes with a carrying handle and easy open screw lid. Recommended for solvent based materials.

Part Sheet: 51-130 & 51-132

51-602 (Bandit - Double Regulated)

51-602 (Bandit - Double Regulated)

The Bandit from C.A.T. band clamp offers 360 degrees of sealing pressure with the turn of one knob and no multiple lid knobs to turn. Recommended for solvent based or water based materials.


Part Sheet: 51-602 (Bandit - Double Regulated)

TJR. HVLP (Gravity) | TJR. DELUXE | TJR. GLAZE

51-202 & 51-802

The 51-202 2.5 gallon non ASME tank from C.A.T. is recommended for solvent based materials.

The 51-802 2.5 gallon non ASME tank from C.A.T. is recommended for solvent based or water based materials.

Part Sheet: 2.5 Gallon Stainless Steel (51-801/802)
Part Sheet: 2.5 Gallon Stainless Steel (51-801/802)



< DSI Accessories Waterborne Finishing Adhesive Systems